spridgets
[Top] [All Lists]

Re: Silicone Brake fluid users

To: "Frank Clarici" <spritenut@Exit109.com>, "Spridgets" <spridgets@autox.team.net>
Subject: Re: Silicone Brake fluid users
Date: Sat, 23 Dec 2000 11:19:48 -0500
References: <3A43DB53.71A28FDA@exit109.com>
I have had good luck installing a mechanical motorcycle rear brake
lite switch and tension spring (available from M/C junkers @ $5).
A good set up is high up on the  brake pedal arm. About 3 inches
long by 3/4 diam.

Mike L
60A,67E,59Bug

----- Original Message -----
From Frank Clarici <spritenut at Exit109.com>
To: Spridgets <spridgets@autox.team.net>
Sent: December 22, 2000 5:53 PM
Subject: Silicone Brake fluid users


> Recently I posted that Ron Francis wire works sells a silicone
fluid
> compatible pressure operated brake light switch.
> Well It lasts 2 months like any of the others. But it costs 5
times as
> much.
> I have solved the silicone brake light switch problem.
> Use a mechanical switch. There is NO alternative. Don't believe
what you
> read.
> I just wish these suppliers would say that their parts suck, and
if
> installed properly and well maintained should last you almost 60
days.
> Unless it comes from China then "we guaranty you will have to
replace it
> in 30 days" But they don't say that. They just push crap down
our
> throats and tell us how lucky we are that they are there.
> --
>
> Chinkle bells,chinkle bells

<Prev in Thread] Current Thread [Next in Thread>