spridgets
[Top] [All Lists]

Re: Repairing pitted surfaces

To: mgagne@unc.edu, spridgets@autox.team.net
Subject: Re: Repairing pitted surfaces
Date: Fri, 28 Sep 2001 17:32:29 EDT
In a message dated 9/28/2001 9:39:49 AM Eastern Daylight Time, mgagne@unc.edu 
writes:


> So how do I get that pitted surface smooth again?  Is this where body filler
> and sanding comes in, or are there other options?
> 

Yes--Body filler is probably the best and easiest option if you want it 
smooth again. Don't try to fill open holes with it, but smoothing a pitted 
surface is easy with bondo.

--David C.



<Prev in Thread] Current Thread [Next in Thread>