hmm the link takes ya to the entire gallery. you need to get to album 9
*http://tinyurl.com/ao28q*
On 9/12/05, William Thompson <willy1959@gmail.com> wrote:
>
> http://thompsoncarpentry.com/personalgallery/album09
> <http://thompsoncarpentry.com/personalgallery/album09+>
> I do this on the Miata on the brakes, and it works GREAT, havent tried it
> on the clutch system yet, but I dont see why it wouldnt work
>
> On 9/12/05, DLancer7676@cs.com <DLancer7676@cs.com> wrote:
> >
> > In a message dated 9/11/2005 11:15:04 PM Eastern Daylight Time,
> > gottstein@gmail.com writes:
> > > clutch fluid reservoir, so I'm going to fill
> > > and bleed the system.
> > > Has anyone figured out an easy, fast, and less messy system for doing
> > this?
> > >
> >
> > I haven't done this, but always had it in the back of my mind to do
> > sometime:
> > Several years ago I ran across a suggestion by a Spridget owner to
> > install a
> > tube in place of the bleed valve in the slave cylinder, running the tube
> > up
> > in the engine compartment to where you could bleed the cylinder from
> > just under
> > the bonnet. The bleed valve was screwed into the end of the extended
> > tube.
> > Made sense.
> >
> > --DAvid C.
|