RE: RE: Spinning at 70mph -Reply

[John Crawley <johnc@nait.ab.ca>]

Hi:
Also watch out, if you change the speedo drive gear, that it has the teeth
cut in the same direction as the original. The gears for the tiger drive are
cut in the opposite direction to most top loaders. I found this out the hard
way when I swapped over to a 4-speed, top-loader, overdrive. If you
put the wrong one in it can wreck the drive gear on the output shaft and
the trans. must come out to fix it.
Godspeed
Jc