tigers
[Top] [All Lists]

Re: [Tigers] Clutch slave push rod to clutch lever

To: "'Tim Webster'" <crabco@shaw.ca>, <tigers@autox.team.net>
Subject: Re: [Tigers] Clutch slave push rod to clutch lever
From: "Robert Palmer" <rpalmerbob@roadrunner.com>
Date: Tue, 30 Oct 2007 21:57:08 -0700
Tim,

I would take a longer 3/8" UNF bolt and see how deep in can be screwed in.
It's very likely the threads are at least 3/4" deep. If not, you can grind
1/8" off of your 3/4" long grade 8 bolts. My machinist always used to tell
me that a bolt attained full strength when treaded in a distance at least
equal to its diameter. Of course, that presupposes good threads.
_______________________________________________

Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

<Prev in Thread] Current Thread [Next in Thread>