tigers
[Top] [All Lists]

Re: [Tigers] Coil Spring Spacer

To: Tony Somebody <achd73@yahoo.com>, Joe Brown <jbbrown1980@gmail.com>,
Subject: Re: [Tigers] Coil Spring Spacer
From: David T Johnson <djoh797014@yahoo.com>
Date: Mon, 20 Sep 2010 09:37:45 -0700 (PDT)
Hear in the salt belt, The aluminum shims actuallly
corrode intyo powder.  At
most United, someone is selling
replacements.  Not expensive.

The shims are
tilting the cross member perhaps to provise
more clearance for the fan etc.
Dave




________________________________
From: Tony Somebody
<achd73@yahoo.com>
To: Joe Brown <jbbrown1980@gmail.com>; mike schreiner
<mikeflbmer@yahoo.com>
Cc: Tigers@autox.team.net
Sent: Mon, September 20, 2010
12:03:51 AM
Subject: Re: [Tigers] Coil Spring Spacer

Joe- the spacers Mike
mentioned that go on top of the front suspension-
originally they are riveted
on- they are not round, so its easy to see they
don't go on the springs but
they do go between the frame rails and the
suspension- have two holes that the
two bolts that hold each side(total of 4
bolts/holes) of the suspension to the
car. Older ones tend to fall off as the
rivets rust and when the suspension is
removed, they sometimes stick to the
suspension, other times to the frame
rails- just depends on the area the car
lived in, if there was salt from
winter roads or dry desert type life for the
car. Alpines have the same part,
made of aluminum with an offset made into
them. I'm sure they are shims that
have more than one reason for Rootes using
them. If they did not have the step
in them, I would think they where just to
keep the two pieces of steel from
rusting and perhaps if we have a member that
know their real reason they are
installed, they would
post it.
Mike I wasn't trying to step on your post, so
please excuse me for doing so
but it was a bit confusing, considering he was
talking about round parts and
the two aluminum pieces I'm thinking you
mentioned are rectangular w/ 2
holes.
regards to all.
TonytheTiger (TonyLang)
--- On Sun, 9/19/10, mike schreiner <mikeflbmer@yahoo.com> wrote:


From: mike
schreiner <mikeflbmer@yahoo.com>
Subject: Re: [Tigers] Coil Spring Spacer
To:
"Joe Brown" <jbbrown1980@gmail.com>
Cc: Tigers@autox.team.net
Date: Sunday,
September 19, 2010, 10:45 PM


Joe,  i always thought the rubber ring only
goes on the bottom of the
spring....( Sunb Spec sells them) an as far as allum
spacers, your not
confusing them with the allum spacers that go between the
suspension and body
are you?  (bolt holes go thru them)  never heard of an
allum spacer on the
spring....home made maybe
_______________________________________________
Tigers@autox.team.net
Donate:
http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/djoh797014@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>