Re: External Gearbox

[tr6taylor@webtv.net (Sally or Dick Taylor)]

Mike---You have the bucket type plugs. You can drill them out and tap
these three bores for a 7/16" set screw. Note the threads will be a
little shallow, but there's no load here, to speak of. Besides, the top
cover will keep these screws from going anywhere.

Peter's tapered tool looks like a good way for getting the balls back
into place.  Jim Davis had sent this idea to me some years ago, but I
had already drilled out the plugs by then. Not sure why Triumph got away
from the set screws.

Dick