On more thing - check the advance/point cam - it should say 7.5.
If the slots are different in size put the heavy spring on the longer of the
2 slots. Not all cams have that feature but some do.
Timing should be the same.
Mike
----- Original Message -----
From: "Charlie" <cehubbard@attbi.com>
To: "Datsun Roadster Mailing List (E-mail)"
<datsun-roadsters@autox.team.net>
Cc: "Tim Corcoran (E-mail)" <corcoran@bainbridgeisland.net>
Sent: Monday, February 18, 2002 8:00 PM
Subject: Swapping 1500 Distributor with a 1600
> I am going to swap out my 1500 Distributor with a 1600 Model on my 1964
> SPL310.
>
> Can anyone tell me:
>
> - Do I still gap the point to 1500 standards (.018 - .020)
> - One of the weight springs (the one that travels further) looks kinda
> streched. The springs dont match). Are both weight springs supposed to be
> tight and look exactly the same?
> - Are there specs for the travel distance and vacume (lbs) for the vacume
> advance?
> - Is the timing set the same.
>
> Any advice would be most appreciated.
>
> Charles Hubbard
> Flower Mound, Texas
> www.tdroc.com
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|