Joe-
Looking at that post - It looks like they had them cut the axle for the
c-clip for the stock hub setup- I may be wrong, but if so then that is going
to be a weak spot no matter how strong the axle- I went through 3 axles that
way as well until we changed over to a new setup-
Chuck's setup which I run with the new hubs eliminates that weak point -
I've run them for 3 years now and no issues what so ever-
Good Luck!
John W.
Spitfire #892 DP
240z CP3
----- Original Message -----
From: "Joe Guinan" <joeg@neb.rr.com>
To: <fot@autox.team.net>
Sent: Wednesday, January 10, 2007 11:19 AM
Subject: [Fot] Summers Brothers Axle Failures?
> Just perusing Kas's forums (at
> <http://p104.ezboard.com/Summers-Brothers-Axels/fkaskastnersforumfrm2.showMe
> ssage?topicID=59.topic>) and saw a note from Steve Adams of Fat Bastard
> Racing in the UK about failures of the Summers Brothers Axles on
> Spitfire/GT6 road racers. Several questions; Any one on this side of the
> pond had problems? Sounds like these were in their 4th year of use, so
> maybe replacement after a couple of seasons is necessary? Have new
> modifications been done to reduce or eliminate the problem? Chuck Gee -
> do
> your hubs eliminate this problem altogether?
>
> Video of one of the incidents from a following car -
> <http://media.putfile.com/Runaway-Wheel>
>
> Joe Guinan
> Fremont, NE
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|