healeys
[Top] [All Lists]

[Healeys] Steering Arm Removal

To: healeys@autox.team.net
Subject: [Healeys] Steering Arm Removal
From: John Kuzman <jjkbj7@yahoo.com>
Date: Fri, 2 May 2008 04:51:08 -0700 (PDT)
   I need some guidance on the removal of the steering arm from the
   steering box on my BJ7. I am attempting to replace the seal.

   I removed the large nut and washer and soaked the joint with PB
   Blaster for over a week. I attached a puller and tightened the puller
   down to the point of almost deforming the puller and the arm has not
   budged. I did not remove the steering side rods from the other end of
   the steering arm. Do these need to come off to remove the arm from the
   steering box splined shaft? Any other suggestions? Thanks.
     _________________________________________________________________

   Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
   it now.
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>