Use one of the sender-tank screws by fixing a wire to the chassis to it.
Thus earthing tank and sender. Often there is a tag to the base of
sender unit to attach said earth wire.
Kees Oudesluijs
Op 18-5-2018 om 08:48 schreef Alan Seigrist:
> At some point, however, the tank must have metal to metal contact
> somewhere to prevent static charge build up and also to make sure the
> gas guage works.
>
> On Tue, May 15, 2018 at 9:39 PM, Bob Spidell <bspidell at comcast.net
>
> Get some reinforced rubber stock--places like Orchard Supply
> (maybe Lowe's, HD, etc.) sell it--and put a couple strips front to
> back to level the tank and keep it off the boot pan.
>
> BTW, if the tank hold-down straps have evenly-spaced holes they're
> for copper rivets to hold a thick canvas-like padding.? You don't
> want the straps rubbing against the tank either (substitute rubber
> if you like).
>
> Bob
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs
> at chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180518/75f2f284/attachment.html>
|