An earth wire from one of the sender screws to the somewhere on the body is
a good idea to make sure tank is earthed.
Don Hardie
Central Coast Australia
On Fri, May 18, 2018 at 4:48 PM, Alan Seigrist <healey.nut at gmail.com> wrote:
> At some point, however, the tank must have metal to metal contact
> somewhere to prevent static charge build up and also to make sure the gas
> guage works.
>
> On Tue, May 15, 2018 at 9:39 PM, Bob Spidell <bspidell at comcast.net> wrote:
>
>> Get some reinforced rubber stock--places like Orchard Supply (maybe
>> Lowe's, HD, etc.) sell it--and put a couple strips front to back to level
>> the tank and keep it off the boot pan.
>>
>> BTW, if the tank hold-down straps have evenly-spaced holes they're for
>> copper rivets to hold a thick canvas-like padding. You don't want the
>> straps rubbing against the tank either (substitute rubber if you like).
>>
>> Bob
>>
>>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healeynut2 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180519/08897d95/attachment.html>
|