[Top] [All Lists]

Re: It's a start

To: Chad Cooper <>
Subject: Re: It's a start
From: Chad Cooper <>
Date: Fri, 22 Jul 2005 18:08:36 -0500
Actually on the weber it is at the base of the carb. right in the 
middle,on the side closest to the valve cover, look there and you will 
see a small brass fitting sticking out, it may be plugged but that is 
where you want to hook the hose for the distributer.
-Chad Cooper

> Mike Torrusio wrote:
>> Well, I looked under the hood.  Maybe, having a mechanic is not the 
>> way to go.  I used to build my own rods a million years ago, now I'm 
>> trying to remember everything from those ancient times.
>> Anyway, the vacuum thing (advance?) on the distributer has a nipple 
>> but does not have anything attached to it.  If I remember correctly, 
>> there should be a little rubber hose attached.  (Don't make fun of 
>> me, I'm very good at legal research).  I looked around for it but 
>> can't remember where it comes from, so it was a futile gesture.
>> Any help would be appreciated.
>> Cordially,
>> Michael Torrusio, Jr.
>> Paralegal
>> Manager
>> Research Associates, LLC
>> P. O. Box 18194
>> Portland, ME 04112
>> 207.252.5787

<Prev in Thread] Current Thread [Next in Thread>