One other thing.
If the bushings are replaced, the inner side is to be made to to the right
fight by a reamer.
An adjustable version might do the job well.
1971 BGT with pedals not wobbling anymore...
----- Original Message -----
From: "Daniel Hackney" <firstname.lastname@example.org>
To: "Barney Gaylord" <email@example.com>
Sent: Wednesday, December 20, 2006 2:02 AM
Subject: Re: pedal wobble
> Your description of the assembly clears things up significantly.
> Thanks as always for the advice.
> On 12/19/06, Barney Gaylord <firstname.lastname@example.org> wrote:
>> It is a bit of a pain to R&R the pedals, but the bushings are
>> otherwise fairly cheap and easy to replace. I spent an extra half
>> hour once measuring things and adjusting the length of the steel
>> bearing tube to minimize clearance for the thrust washers. This was
>> time well spent, as I haven't felt the need to change the bushings
>> again in a very long time.
>> Barney Gaylord
>> 1958 MGA with an attitude