[Top] [All Lists]

Re: pedal wobble

To: "Barney Gaylord" <>
Subject: Re: pedal wobble
From: "Daniel Hackney" <>
Date: Tue, 19 Dec 2006 20:02:01 -0500

Your description of the assembly clears things up significantly.
Thanks as always for the advice.


On 12/19/06, Barney Gaylord <> wrote:
> It is a bit of a pain to R&R the pedals, but the bushings are
> otherwise fairly cheap and easy to replace.  I spent an extra half
> hour once measuring things and adjusting the length of the steel
> bearing tube to minimize clearance for the thrust washers.  This was
> time well spent, as I haven't felt the need to change the bushings
> again in a very long time.
> Barney Gaylord
> 1958 MGA with an attitude

<Prev in Thread] Current Thread [Next in Thread>