I put a 2x4 thru the windows(doors off) put a sling around the 2x4 and
lifted with my farm tractor,you can do the same thing with an A-frame and
push the frame out from under it.
Good Luck
HooT58
----- Original Message -----
From: <Ie61pah@aol.com>
To: <steve@OldSub.com>; <oletrucks@autox.team.net>
Sent: Tuesday, May 20, 2003 10:44 AM
Subject: Re: [oletrucks] Lifting the Cab Off
> I have done it two ways. First, I used an engine puller and a sling and
> just lifted the cab straight up, then rolled the frame out from under it.
> When I got hurt last year, 4 friends came over, picked up the cab and put
it
> back on the frame. They then rolled the frame out on the patio, and
covered
> it up for me. It only had the front axle/wheels on it. You can also jack
up
> the entire truck as high as you can, (safely), then block up under the cab
> (under door post) then let the frame down and roll it out from under the
cab.
> Good luck and be safe, Pat
> Hollister 58 step
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|