oletrucks
[Top] [All Lists]

Re: [oletrucks] diesel

To: "Gary Perry" <glperry@fwi.com>, "mark" <ccpanel@jps.net>,
Subject: Re: [oletrucks] diesel
From: "Bob KNOTTS" <raknotts@qwest.net>
Date: Tue, 24 Jun 2003 02:37:49 -0700
IH has used a lot of other diesels, and/or owners have had the trucks
repowered with other make engines-especially Cummins, and Caterpiller
(larger mainly). Back in the 50's & 60's Buda was a big name for repowering
with diesels. And at one time Cummins put out kits to adapt their different
diesel  engines to FXXD, Chevy, etc. Even 1/2 and 3/4 ton delivery vans.
Motor mounts, radiators, etc. I don't think they do it anymore, maybe
because of emission problems and liabilities. But converting to a diesel
from gas is definitely a huge job. You would almost HAVE to have a diesel
expert available for technical help.  But on the other hand, NOTHING pulls
like a diesel. Several years ago I was going up the hills from Roosevelt
Lake to Payson, here in AZ. I was driving a fairly new Chrysler minivan with
a V-6 engine. The fastest I could go was 35. An older model (1991-92)
Dodge/Cummins 3/4 ton pick up, towing a 35 foot Avion fifth wheel travel
trailer, went by me doing AT LEAST 10 miles an hour faster. Don't buy a
diesel for great fuel economy, buy one for brute towing power!! But they're
not cheap, either as a repower, or a new vehicle. Bob K in PHX, AZ.


----- Original Message ----- 
From: "Gary Perry" <glperry@fwi.com>
To: "mark" <ccpanel@jps.net>; <oletrucks@autox.team.net>
Sent: Tuesday, June 24, 2003 12:51 AM
Subject: Re: [oletrucks] diesel


> Not sure what this is about, BUT, IH makes most of their own Deisels, even
> make the Ford ones! Models I don't know. Isn't there a door plate or one
in
> glovebox to give better info? At least HP, and size or ?
> 11mpg with 235 pulling big load don't seem that bad to me. For all the
> trouble it will be to change over, and ruin the originality of your truck
> (whatever it is) it's not worth it. Sell the old truck as is, buy
something
> else with more power and convenience, maybe a Deisel and be happy with
that!
> I'm sure your trans won't bolt up to Dsl, and mounts will have to be made,
> rad won't be big enough, and won't fit in old truck space, and Dsl is much
> heavier than six and need bigger springs and etc. etc. etc. OH, yeah, new
> gas tank with dual fuel lines, not single like on gas engine. In and out
> lines.
> Hackers! Can't leave stuff alone can ya!
>
> G. L. Grumpy's
> Old Iron Ranch
> Huntington, IN 46750
> AD trucks and MM tractors
> ----- Original Message -----
> From: "mark" <ccpanel@jps.net>
> To: <oletrucks@autox.team.net>
> Sent: Monday, June 23, 2003 8:13 PM
> Subject: [oletrucks] diesel
>
>
> > i finally looked at my diesel i have. i forgot the cam so heres a
> description;
> > it has asymetrical valve covers-straight on intake side and funky
cutouts
> on
> > exhaust side. injector pump is in front of (carb)air manager,  alt is a
> 130A
> > and the name on it starts with a "P", the water outlet is center and has
a
> > large half-circle mounting in front of the pump, fuel pump is the same
> pos.
> > as SBC, the rad intake is drivers side low.,  the exhaust manifold is
like
> > BBC and not siameses. the body is an 87 international.
> >
> >         what is it?
> >
> > what is the power rating and approx fuel milage in maybe a 6-8,000#
truck.
> >
> > my 235/6 gets 11mpg in the mountains moving my HUGE camper where the
> diesel
> > if it seems to be better will reside. thanks for the info guys!(and
gals)
> > mark
> >
> >
> >
> >
> >   http://customclassics.org
> >
> >        northern california
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>