oletrucks
[Top] [All Lists]

Re: [oletrucks] Rear end to fit Art Deco?

To: "William Schickling" <wschick1@twcny.rr.com>,
Subject: Re: [oletrucks] Rear end to fit Art Deco?
From: "Pat Cossey" <ccossey@seark.net>
Date: Thu, 23 Oct 2003 18:25:49 -0500
Thanks Bill, I`m considering buying the fiberglass fenders that can be
bought that are 2 inches wider than stock. (need to replace rear fenders
anyway)
I`m not to concerened with spring placement as I can reweld perches if need
be.

Pat    67 Nova SS
         41 Art  Deco chevy truck
----- Original Message ----- 
From: "William Schickling" <wschick1@twcny.rr.com>
To: "Pat Cossey" <ccossey@seark.net>; "Oletrucks" <oletrucks@autox.team.net>
Sent: Thursday, October 23, 2003 7:04 AM
Subject: RE: [oletrucks] Rear end to fit Art Deco?


> I am putting a 19551st 1/2ton rear end in my 1940. The rear end will fit
on
> top of the springs and is only 1 inch wider on each side. It is
practically
> a bolt in. It has 6 lugs and open drive line. Of course they were only
made
> for 6 months and they are hard to come by.
>
> I am not 100% sure but I think 19552nd and after the axle rode under the
> springs and not on top. Maybe you can flip it over and run it on top.
>
> Bill Schickling
>
> -----Original Message-----
> From: owner-oletrucks@autox.team.net
> [mailto:owner-oletrucks@autox.team.net]On Behalf Of Pat Cossey
> Sent: Wednesday, October 22, 2003 9:50 PM
> To: Truck list
> Subject: [oletrucks] Rear end to fit Art Deco?
>
>
> I`m sure at some point this has been covered,But what rear end will fit
> under
> my 41 and still have the 6 lugs?
> Iv`e been told some of the early to late 60`s chevy trucks may have one
that
> will work?
>  Thanks guys!!
>
>
> Pat    67 Nova SS
>          41 Art  Deco chevy truck
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>