[Top] [All Lists]

Re: Sanding Disk for Table Saw

To: <>
Subject: Re: Sanding Disk for Table Saw
From: "Elton Clark" <>
Date: Thu, 19 Jul 2001 14:27:08 -0500
----- Original Message -----
From: James Babcock <>

> I suspect that you have not had trouble with the side loading of
> the saw motor.

No, there's very little side load if used properly . . . & Sear's sold it
for use on their own saws.

> I bought some special tacky glue from Sears several years ago.
> It's called Sanding Disk Adhesive I think.  Gob it on and let
> it dry, then apply the disk.  The stuff allows the worn disk
> to be removed quite easily.  I have used it on a 4"
> rubber disk, but I expect it would work for a metal disk as well.

Yep, that's what I used also, but maybe I let it get a little too hot 'cause
it was hard to scrape off.
I use adhesive-backed discs on the 6 inch aluminum disk built on my belt
sander . . .they stick very "permanently" also .  .  . I'm likely building
too much heat there too.


/// mailing list
///  To unsubscribe send a plain text message to
///  with nothing in it but
///     unsubscribe shop-talk

<Prev in Thread] Current Thread [Next in Thread>