spitfires
[Top] [All Lists]

Re: Cylinder Head Removal

To: Bob Norway <examiner@scci.net>, GatesDavid@aol.com
Subject: Re: Cylinder Head Removal
From: jak0pab@jak10.med.navy.mil (Bowen, Patrick A. RP2)
Date: Mon, 28 Dec 1998 15:49:52
Bob there is a special tool you can get to remove studs (my dad had one)
fits on the end of a ratchet extension and as you twist it grips onto the
stud.  Probably costs $10 at a tool store.

Patrick Bowen
At 12:48 PM 12/28/98 -0500, Bob Norway wrote:
>Dave,
>Thanks for the info.... but how did you go about removing the studs? Use a
>vise-grip or doublenut the end?
>
>Bob
>
>GatesDavid@aol.com wrote:
>
>> Bob,
>>
>> Been there, done that.  When I removed my head, I found that it really
did not
>> want to come off.  I ended up removing all the head studs.  Then, using
a 2x4
>> a couple feet long and a large hammer placed the 2x4 against the head
and hit
>> the other end with the hammer.  A couple good hits and it loosened up
enough
>> to remove it with my hands.  With the head studs out I didn't have to worry
>> about damaging them and it allowed the head a bit of sideways motion
instead
>> of just upward.
>>
>> Hope this helps,
>> David Gates
>>
>> In a message dated 12/28/98 6:44:08 AM Hawaiian Standard Time,
>> examiner@scci.net writes:
>>
>> > I am contemplating removing the head to have the valves checked, turned,
>> >  etc. and replace all gaskets. I have been told that I MAY have a problem
>> >  getting the head off of the 10 long studs and that they have been known
>> >  to break in the process. Has anybody ever encountered this problem, and
>> >  if so how could it be remedied so that it doesn't happen? Any
>> >  suggestions in this area will be greatly appreciated....
>> >
>> >  Hope everyone had a very Merry Christmas and got all the Spit stuff they
>> >  wanted.....
>> >
>> >  Cheers
>> >  Bob
>> >
>
>--
>Bob Norway
>Rockledge, Florida
>Home Page http://www.geocities.com/CapitolHill/Lobby/5953/mypage.html
>ICQ# 3752712
>***************************
>TLCB - Thailand, Laos, Cambodia Brotherhood
>http://www.seacoast.com/~jsweet/brotherh/index.html
>Udorn RTAFB Nov'70 - Nov'71
>432 AMS/Autopilot
>***************************
>SpitList
>1976 Triumph Spitfire 1500
>FM43376UO - Daily Driver
>***************************
>"Don't Take My Pint Mate,
>I'm In The Loo!"
>
>
>
Patrick Bowen
'79 Spitfire
Jacksonville FL

<Prev in Thread] Current Thread [Next in Thread>