spitfires
[Top] [All Lists]

Re: viscous coupling

To: "DT Gebhard" <kimkell@decaturnet.com>, <alemen@pop.ftconnect.com>,
Subject: Re: viscous coupling
From: wizardz@toad.net
Date: Mon, 19 Jun 2000 22:52:40 -0400
keep a close eye on any recently replaced fan clutch.

....stop and think for a moment.....
If you were able to press it on in place, why wouldn't
just a little wear on that tiny sliver of metal let it slip
off while being spun at high speed.

It happens. Ask any parts yard guy, how many
damaged radiators he's seen.

Don't for a moment believe that this is limited to LBC's.

When water pump bearings go, they go abruptly. I've had fans
with pulleys attached, end up in front the radiator after passing
through it. The bearing had literally cut through the shaft
in under 1000 miles.

Paul Tegler   wizardz@toad.net     www.teglerizer.com

-----Original Message-----
From: DT Gebhard <kimkell@decaturnet.com>
To: alemen@pop.ftconnect.com <alemen@pop.ftconnect.com>;
spitfires@autox.team.net <spitfires@autox.team.net>
Date: Monday, June 19, 2000 10:16 PM
Subject: Re: viscous coupling


>
>For a 100.00 bucks,I'd rather replace with a n electric fan. I seem to
>remember someone on the list talking about the fan clutch giving out and
>throwing the fan into the radiator.
>        Dave
>----- Original Message -----
>From: <alemen@pop.ftconnect.com>
>To: <spitfires@autox.team.net>
>Sent: Monday, June 19, 2000 1:02 PM
>Subject: Re: viscous coupling
>
>
>>
>> Brent, I just replaced mine a couple of weeks ago.
>>
>> It was loose like yours and made lots of noise. It's so much quieter with
>it replaced. I was lucky and one of my local sources had a good used one.
My
>water pump was fine. It should not be floppy and should have a good
>resistance when you try to turn the fan. The old one turned quite easily by
>hand.
>>
>> I suggest you either get a good used one, look on ebay (I have seen a
used
>and a NOS there) or you could go with an electric fan.
>>
>> Alan
>> '76 Spitfire
>>
>> Original Message:
>> -----------------
>> From: BJ Martin bj_martin@hotmail.com
>> Date: Mon, 19 Jun 2000 09:08:03 PDT
>> Subject: viscous coupling
>>
>>
>>
>>
>> During investigation of a water pump noise, I find that there is "play"
in
>> the viscous coupling. I'm able to noticably rock the "bearings" in it
from
>> side to side and now I wonder if the noise was actually this rather than
>the
>> water pump itself. At over $100, I prefer not to change it out unless it
>is
>> really wearing out. Are these normally "sloppy"? thanks, brent
>> ________________________________________________________________________
>>
>>
>>
>> -------------------------------------------------------------------
>> This message has been posted from Mail2Web http://www.mail2web.com/
>> Web Hosting for $9.95 per month! Visit: http://www.yourhosting.com/
>> -------------------------------------------------------------------
>>
>>
>
>


<Prev in Thread] Current Thread [Next in Thread>