Paul, I have done this conversion many times. There is no difference in the
speedometer! The one that is already is the correct one. To show the
point, if you are in fourth gear your tach and speedo will match on both a 4
speed and overdrive tranny. If you have changed yours, than I am afraid it
is now wrong.
From: wizardz [mailto:firstname.lastname@example.org]
Sent: Sunday, July 09, 2000 12:12 AM
To: david_schenck; email@example.com
Subject: Re: O/D transmission install
Yes...it's a straight bolt in. I just did mine last weekend.
You need to also grab the tranny rear mount plate that bolts to the chassis,
the speedo cable is different as is the speedometer (1280 revs per mile vs
1000 per mile)
and don't forget the wiring .
Paul Tegler firstname.lastname@example.org http://www.teglerizer.com
From: david_schenck <email@example.com>
To: firstname.lastname@example.org <email@example.com>
Date: Saturday, July 08, 2000 11:09 PM
Subject: O/D transmission install
>My non o/d transmission is a little funny and I am thinking of putting in
>O/D replacement if I can find one reasonably priced. Is it as simple as
>pulling the old non o/d unit out and popping in the new unit or are there
>other modifications that need to be made?