JoeSimcoe writes:
<<We tried to balance the carburators Sunday but couldn't get the Unisyn to
<<work properly.
You must rotate the adjuster to close off some of the flow through the
Uni-Syn. The adjuster is the round thing in the middle of the ring that
fits against the carb. (ascii graphics not attempted)
If yours is like mine there may be a large casting burr that needs to be
filed off so that you can screw the adjuster down sufficiently.
Good luck,
Tom Gentry
72 TR-6 OD
Rockford, IL
TGENTR@WGC.WOODWARD.COM
|