DAVE,
I AM JUST STARTING TO RESTORE A TR4 . I HAVE A SET OF REAR LEAF SPRINGS WITH
QUITE A SUBSTANTIAL BOW IN IT, WHICH CAME FROM A FRAME THAT HAD THE SPACERS.
THE SPRINGS THAT I USED WERE QUITE A BIT FLATTER AND FIT ON THE FRAME WITH
LITTLE PROBLEM. I THINK IF YOU HAVE THE FLATTER SPRINGS, YOU WILL EITHER
HAVE TO OBTAIN THE CURVED SPRINGS, OR ELIMINATE THE SPACERS AND MOUNT THE
SHOCKS UNDER THE SPRINGS. I CAN'T SEE WHERE THE MOUNTING SPACING ON THE TWO
FRAMES IS DIFFERENT. SO I THINK YOU HAVE TO MATCH THE SPRINGS WITH YOUR
SPACER.
GOOD LUCK
JIM
TRAVERSE CITY, MI.
73TR6
? TR4
JIMSTR6@AOL.COM
|