TR6 Carb Results

["Martin Gonzales" <mxgo@ix.netcom.com>]

Replaced existing carb needles with "lean" needles, from Apple Hydraulics
and lowered the CO readings on my 73  tr6 to 3.46% (California max. CO is
5.5%) and it runs fine.  My HC readings were high, however I run the car at
10 degrees BTDC.  I was not smogging the car, I only was checking the new
needles.  I use 30 weight oil in the dampers.  Hopefully this info will
help others.

Martin Gonzales, 73 TR6