Just got off the phone with Dave at the Roadster Factory and he confirms
that the upper fulcrum pins for a TR 4 through 6 mount the opposite way
you would expect--the concave side points toward the engine, not around
the damper housing as it was actually designed to do. The TRF parts
manual does show this, but not clearly enough to risk another teardown.
Thanks to Chris, Andy and Fred for the quick feedback.
Ian CF57345U
On 09/22/98 12:25 PM canada said...
>
>Listers--
>
>When bolting the upper fulcrum pins to the frame above the coil spring
>housing, there appears to be two ways to orient them: "flat" side out or
>"concave" side out. Does anyone know which way is correct?
>
>The only pieces I've taken off that I didn't diagram (so far).
>
>Thanks.
>
>Ian CF57345U
|