There are some variations in the block groove it fits into because the
precise depth was not critical with the old oil filter spring load
arrangement. Thus, some playing is required to achieve a good seal both
inner and outer. My outer groove was unusually deep and had to machine down
the inner ring slightly to get a good seal on the outer ring. Most do not
need to do this. It is not a big deal and once done the perpetual
convenience of spin on filters makes it all worthwhile.
Jim Altman jaltman@altlaw.com Illigitimi non Carborundum
http://www.altlaw.com/metro/jaltman.html 69-TR6#CC28754L W4UCK
> -----Original Message-----
> From: owner-triumphs@autox.team.net
> [mailto:owner-triumphs@autox.team.net]On Behalf Of Tom Vaughn
> Sent: Saturday, March 13, 1999 3:19 AM
> To: Triumphs
> Subject: Oil Filter Adapter
>
>
>
> Hello All,
>
> Is the oil filter adapter that lets you use a spin on filter reliable?
> Do all the suppliers sell the same one?
>
> Thanks,
>
> Tom
>
> 1958 Triumph TR3
> 1964 Ford Galaxie 500XL
>
|