I know that there has been some discussion in here on how to do this,
but I can't remember the specifics. Now I'm faced with putting my TR250
on jacks to re-bush, re-spring, etc.
It seems to me that the front end should go up first, then the rear.
Side to side doesn't seem to be the right way, because of clearance
problems for the jack on the low side, if for no other reason.
Can someone give me a hint as to the best procedure (at what points to
jack,especially in the rear), and where I should place the jackstands
once its up?
Thanks,
Alex
TR250 (running REAL well again)
|