Re: Replacing Pinion Seal in Differential

["mahutchinson" <mahutchinson@cox.net>]

 In addition to prying them out with the screws, I've had great sucess using
a screw like that but put a small slide hammer on it and it just taps right
out.

Michael

> A method which has worked for me is to thread a #8 or #10 self-tapping
> screw into either side of the seal, them carefully lever it out.  Not
> trivial, but the method works.  And sure beats pulling the diff apart.
>
> hth
>
> Jim