The last item to pull from the rear of the TR3A is the leaf spring on the
right side. After a relatively smooth extraction of the spring eye bolt on the
left side, it's only fair that this one is a struggle. It won't budge.
I'm ready to receive all home-remedies or voodoo incantations that might
summon the bolt home. I've applied Liquid Wrench for the last 24 hours, and I
even
tried the old "oversized socket, washer and screw" trick to see if I could
extract it through a "reverse press."
I've no wish to cut a hole in the body to drive it out with a drift. Other
ideas?
TIA,
Bill Stagg
1961 TR3A
|