triumphs
[Top] [All Lists]

Re: Extracting Spring Eye Bolt from TR3A

To: "Randall Young" <Ryoung@navcomtech.com>, <triumphs@autox.team.net>
Subject: Re: Extracting Spring Eye Bolt from TR3A
From: "Ken Copeland" <khoco@comcast.net>
Date: Wed, 18 Feb 2004 11:58:43 -0500
References: <NOEDJDCNFBCNELMBFNFEOEKFGFAA.Ryoung@navcomtech.com>
I just bought some Sili-Kroil at Eastwood about 2 months ago
   I think they still have it.






 I've applied Liquid Wrench for the last 24 hours,
> IMO PB Blaster (available at Wally-Mart) works much better than Liquid
> Wrench.  Kano Sili-Kroil is also better than LW (but apparently no longer
> available for retail sale).  Heat will also sometimes help, get things as
> hot as you can (note that all the above mentioned substances are
flammable,
> but will only burn for a few seconds), and then douse with PB Blaster (or
> whatever).  PB Blaster also seems to continue working for several days ...
> I've had things come apart after a week of soaking when they were still
> seized tight after a day.





<Prev in Thread] Current Thread [Next in Thread>