Triumph Listers-this a one time production proposal for a NLA TR4 part.
Description: The bracket that ties the dash and center console together
There are two styles of brackets. "Early" & "Late". On the early bracket
the offset bends extends to the rear. On the late bracket the offset bends
extends to the front. I believe them to be interchangeable.
I have offered to do a one time production run of both styles of bracket, if
I have (10) advance orders of each style.
They will initially be produced without the aperture for a radio. With some
discussion with the buyer, I can likely produce the aperture for the radio at
additional cost. Crinkle finish will also be available, if desired, at
additional cost.
Cost per bracket will be $30 plus shipping. (All brackets will have the four
mounting holes)
I see the market as:
Replacement for those brackets missing from project.
Replacement for those bracket damaged or modified.
Saving original bracket while installing MODERN ELECTRONICS or switches.
Other?
All I need is an "Intent to Purchase" with name, address, style wanted
(early/late). If I get 10 'intents' for 10 or more of each or either, I will
proceed with production.
(Preference for custom radio aperture and crinkle finish might be stated)
We will provide a link to the final drawings of both styles, but register
your intent quickly, so I can make a decision to launch production. The bracket
will be faithfully reproduced with Laser Blanking and Universal Bending Brake
tooling.
Thanks to Kurtis Jones and Carl Sereda for providing the inspiration,
dimensions, and well done drawings.
Regards,
Joe Alexander
|