Re: TR3 valve adjustment

["Paul Dorsey" <dorpaul@negia.net>]

Hi,
I'm several weeks away from ever having had my TR3 running, so I also want to
learn how to adjust valves!

It seems as if the method Randall describes is most accurate cause 180 degrees
opposite the TDC can be measured exactly.  Whereas, "the nine rule" isin't as
accurate because one has to make a judgement call as to when each valve is
fully open by oberving ether the valve stems or through the spark plug hole.

Am I right or wrong about this?

Thanks, Paul Dorsey
60 TR3A