I'd like to learn more about how you plumbed the air supply?
JVV
----- Original Message -----
From: <shrack04@netzero.net>
To: <triumphs@autox.team.net>
Sent: Monday, October 03, 2005 8:45 AM
Subject: TR3 oil pressure
> When restoring my car, I took apart everything. When I went to the book
to see how to adjust the oil pressure after taking it apart and having it
plated, it said, NEVER take it apart. I rigged a hose and clamp onto my
compressor, and adjusted the air pressure up and down with the regulator
until at 60 psi, I could hear the ball lift and make a vibration sound. My
car now has just slightly above 60 psi warm, cold, & idle and just a little
above that at speed. Just what I did, Kent Shrack TS78563 "o"
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|