In any case, once you get ALL of the ground connections clean, why not keep
them that way with a good coating of silicone dielectric grease ? Those
connections should stay shiny clean and conduct well from then on.
Karl
> So here's a thought: The substitute web page says that the GM module is
> grounded to the inside of the Lucas box which is then grounded to the
> body. What if the ground connection between the GM module and the Lucas
> box is iffy? Might be worth measuring before you pull the GM module out
> of the Lucas box.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|