[TR] Shaking TR3

Subject:	[TR] Shaking TR3
From:	Dave1massey at cs.com (Dave1massey at cs.com)
Date:	Fri, 17 Jun 2011 17:27:34 -0400 (EDT)

In a message dated 6/17/2011 2:54:01 PM Central Daylight Time, 
tfansher at comcast.net writes: 
> Dave, "easy-peasy"?????
> Tom
> From: Dave1massey at cs.com
> <snip>
> 
> I think that's what he meant.  If you have wires and spacers you can 
> remove 
> the spline hubs and spacers and bolt up a steel wheel.  Easy-peasy.


Compared to changing out the studs...

<Prev in Thread]	Current Thread	[Next in Thread>
[TR] Shaking TR3, (continued) [TR] Shaking TR3, Don Spence Re: [TR] Shaking TR3, Frank Fisher [TR] Shaking TR3, Frank Fisher Re: [TR] Shaking TR3, John Herrera [TR] Shaking TR3, John Herrera Re: [TR] Shaking TR3, Dave1massey [TR] Shaking TR3, Dave1massey at cs.com Re: [TR] Shaking TR3, tfansher [TR] Shaking TR3, tfansher at comcast.net Re: [TR] Shaking TR3, Dave1massey [TR] Shaking TR3, Dave1massey at cs.com <= Re: [TR] Shaking TR3, Don [TR] Shaking TR3, Don [TR] shaking TR3, Don [TR] shaking TR3, Don Re: [TR] Shaking TR3, dave1massey [TR] Shaking TR3, dave1massey at cs.com Re: [TR] Shaking TR3, pethier [TR] Shaking TR3, pethier at comcast.net Re: [TR] Shaking TR3, John Macartney [TR] Shaking TR3, John Macartney

Previous by Date:	Re: [TR] Shaking TR3, Dave1massey
Next by Date:	Re: [TR] Triumphs Digest, Vol 4, Issue 16, Jerry Van Vlack
Previous by Thread:	Re: [TR] Shaking TR3, Dave1massey
Next by Thread:	Re: [TR] Shaking TR3, Don
Indexes:	[Date] [Thread] [Top] [All Lists]