triumphs
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TR] Shaking TR3

from [Dave1massey] [Permanent Link][Original]
To: triumphs@autox.team.net
Subject: Re: [TR] Shaking TR3
From: Dave1massey@cs.com
Date: Fri, 17 Jun 2011 17:27:34 -0400 (EDT) 
In a message dated 6/17/2011 2:54:01 PM Central Daylight Time, 
tfansher@comcast.net writes: 
> Dave, "easy-peasy"?????
> Tom
> From: Dave1massey@cs.com
> <snip>
> 
> I think that's what he meant.  If you have wires and spacers you can 
> remove 
> the spline hubs and spacers and bolt up a steel wheel.  Easy-peasy.


Compared to changing out the studs...
triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [TR] Triumphs Digest, Vol 4, Issue 16, Andrew Uprichard
Next by Date:  [TR] Shaking TR3, Dave1massey at cs.com
Previous by Thread:  [TR] Shaking TR3, tfansher at comcast.net
Next by Thread:  [TR] Shaking TR3, Dave1massey at cs.com
Indexes:  [Date] [Thread] [Top] [All Lists]