- 81. [oletrucks] Vendor report (score: 1)
- Author: Mask1966@aol.com
- Date: Mon, 20 Oct 2003 12:46:30 EDT
- Fellow truckers, Over the years, I have read many reports on less than great vendors and poor customer service. I'm here to tell you about a super experience I had with a vendor who stands behind his
- /html/oletrucks/2003-10/msg00192.html (7,390 bytes)
- 82. Re: [oletrucks] Farco?? (score: 1)
- Author: Mask1966@aol.com
- Date: Wed, 22 Oct 2003 12:20:26 EDT
- That would be a Fargo truck. Nothing more than a Canadian built Dodge with Fargo ID. Low production numbers usually, but not sure on values. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Fal
- /html/oletrucks/2003-10/msg00208.html (7,042 bytes)
- 83. [oletrucks] Starter Shims? (score: 1)
- Author: Mask1966@aol.com
- Date: Sun, 26 Oct 2003 21:36:16 EST
- Hey V8 guys, how do I know how many shims to install with my 305 starter? I know there is some measurement to be made, but where and how much? Help, the motor goes in tomorrow. Mike Klepp '48 3100 5
- /html/oletrucks/2003-10/msg00293.html (6,875 bytes)
- 84. Re: [oletrucks] driveshaft (score: 1)
- Author: Mask1966@aol.com
- Date: Tue, 2 Sep 2003 12:26:54 EDT
- In a message dated 9/2/2003 6:01:52 AM Central Standard Time, lcorley@ticnet.com writes: I can modify the shaft or fabricate a lever, but before I spent the time and effort, I wanted to check with th
- /html/oletrucks/2003-09/msg00021.html (7,464 bytes)
- 85. [oletrucks] Show report (score: 1)
- Author: Mask1966@aol.com
- Date: Mon, 29 Sep 2003 12:37:38 EDT
- Last week I was in FL visiting my father-in-law who is retired and living in "The Villages" between Ocala and Orlando. On Saturday, the 20th of Sep, the Villages advertised a car show in the square.
- /html/oletrucks/2003-09/msg00384.html (7,213 bytes)
- 86. Re: [oletrucks] Poly ride liner (score: 1)
- Author: Mask1966@aol.com
- Date: Thu, 7 Aug 2003 09:49:31 EDT
- Try a travel trailer supply place. They have all kinds of u bolts. Mike K oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
- /html/oletrucks/2003-08/msg00062.html (7,103 bytes)
- 87. [oletrucks] Fan Advice? (score: 1)
- Author: Mask1966@aol.com
- Date: Tue, 12 Aug 2003 20:48:01 EDT
- To gain maximum cooling, which is better? 1. A stock clutched fan or flex fan with a properly sized shroud; or 2. A properly sized electric pusher fan controlled by a thermostat. Need your experience
- /html/oletrucks/2003-08/msg00155.html (6,690 bytes)
- 88. Re: [oletrucks] Garage Drip Pans... (score: 1)
- Author: Mask1966@aol.com
- Date: Fri, 29 Aug 2003 11:13:24 EDT
- Both my trucks have minor leaks and SWMBO says "No mess on the garage floor!" I look for large cardboard boxes at work, the type new furniture is shipped in. I take them home and cut into quarters (u
- /html/oletrucks/2003-08/msg00403.html (7,786 bytes)
- 89. Re: [oletrucks] cowl vent leaking water into engine oil? (score: 1)
- Author: Mask1966@aol.com
- Date: Sun, 31 Aug 2003 08:29:29 EDT
- Mike Klepp oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
- /html/oletrucks/2003-08/msg00431.html (7,106 bytes)
- 90. [oletrucks] Carb help (score: 1)
- Author: Mask1966@aol.com
- Date: Fri, 4 Jul 2003 22:38:09 EDT
- I'm building a 305 with an 2 barrel Rochester 2GCV carb. I need help on the vacuum connections from someone running this carb. Pictures would be great, but I need to know where the to hook everything
- /html/oletrucks/2003-07/msg00091.html (6,526 bytes)
- 91. Re: [oletrucks] horn relay - design function? bad to not use it (score: 1)
- Author: Mask1966@aol.com
- Date: Mon, 7 Jul 2003 12:28:40 EDT
- The purpose of the relay is to allow the use of a low current in the horn button circuit to energize the relay and control the high current horn circuit. All horns should work with "straight voltage"
- /html/oletrucks/2003-07/msg00124.html (7,653 bytes)
- 92. Re: [oletrucks] Intro (score: 1)
- Author: Mask1966@aol.com
- Date: Thu, 10 Jul 2003 19:29:49 EDT
- I'm a transplanted Cheese-Head (in TX) and I highly recommend the Iola show. It is a monster. 4300+ swap meet spaces, 2500 show cars, 1000 cars in the car coral. Take your walking shoes, the swap mee
- /html/oletrucks/2003-07/msg00162.html (8,380 bytes)
- 93. Re: [oletrucks] 1968 C-10 rear end (score: 1)
- Author: Mask1966@aol.com
- Date: Tue, 22 Jul 2003 20:25:53 EDT
- The 68 C-10 hubs came from the factory with six lugs. If this one is five lug it has been swapped or the hubs are redrilled for five lugs. It can be swapped, but the spring perches will likely need r
- /html/oletrucks/2003-07/msg00539.html (7,615 bytes)
- 94. [oletrucks] Off topic - but still truck stuff (score: 1)
- Author: Mask1966@aol.com
- Date: Tue, 22 Jul 2003 20:32:52 EDT
- Sorry to go off topic, but I need to know what year 1/2 ton had the swing arm rear suspension. Thanks. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devoted to Chevy a
- /html/oletrucks/2003-07/msg00541.html (6,611 bytes)
- 95. [oletrucks] Re: [old-chevy-truck] Z49 Detail pics (score: 1)
- Author: Mask1966@aol.com
- Date: Fri, 25 Jul 2003 20:58:06 EDT
- Tom, Where did you get the stovebolt 235 emblem? It is too cool! Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks built between 1941 and 19
- /html/oletrucks/2003-07/msg00677.html (6,854 bytes)
- 96. [oletrucks] Test (score: 1)
- Author: Mask1966@aol.com
- Date: Thu, 31 Jul 2003 21:32:32 EDT
- Disregard this test. oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
- /html/oletrucks/2003-07/msg00816.html (6,232 bytes)
- 97. Re: [oletrucks] AD bumpers? (score: 1)
- Author: Mask1966@aol.com
- Date: Sun, 1 Jun 2003 22:01:38 EDT
- The curved one goes on the front, the straighter one to the rear. I've seen trucks with fronts on both ends, and reversed too. Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletruc
- /html/oletrucks/2003-06/msg00005.html (6,564 bytes)
- 98. Re: [oletrucks] Sun Visor (score: 1)
- Author: Mask1966@aol.com
- Date: Wed, 4 Jun 2003 12:36:03 EDT
- Sorry to bust your bubble on this one, but I searched for nearly a year for one clamp for my Fulton and could not find any vendor who would sell one. These are not repoped and originals usually go wi
- /html/oletrucks/2003-06/msg00055.html (7,404 bytes)
- 99. Re: [oletrucks] OT: '78 Wiring diagrams? (score: 1)
- Author: Mask1966@aol.com
- Date: Thu, 5 Jun 2003 12:35:51 EDT
- one :-) Mike Klepp '48 3100 5 window '65 C-10 stepside Wichita Falls, TX oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
- /html/oletrucks/2003-06/msg00081.html (7,481 bytes)
- 100. Re: [oletrucks] Hood Hinge adjustment (score: 1)
- Author: Mask1966@aol.com
- Date: Tue, 10 Jun 2003 12:28:37 EDT
- Karen, Am I correct in assuming the hood stands open (up) on the back side, near the windshield? Are the hinges "new" hinges? If they are used, they are probably worn too. A good test is to remove th
- /html/oletrucks/2003-06/msg00167.html (8,338 bytes)
This search system is powered by
Namazu