Search String: Display: Description: Sort:

Results:

References: [ +from:bk13@earthlink.net: 239 ]

Total 239 documents matching your query.

161. Re: [Shop-talk] test lead connectors (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Sun, 29 Dec 2013 11:38:41 -0800
John - You can buy just the pins that go in the connector without the connector body. Typically when making a connector, you connect the wire to the pin then insert it in the connector. A local elect
/html/shop-talk/2013-12/msg00095.html (12,127 bytes)

162. Re: [Shop-talk] How to purchase a Cornwell tool? (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Sun, 10 Aug 2014 10:47:42 -0700
If you are not tied to Cornwell and just want that function for home use, I have a set from harbor Freight that works well. http://www.harborfreight.com/3-piece-thumbwheel-ratchet-set-94011.html Curr
/html/shop-talk/2014-08/msg00005.html (11,601 bytes)

163. Re: [Shop-talk] tv in the shop (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Thu, 14 Aug 2014 16:33:27 -0700
John - For the future, if you want to build up an inventory, you can add a tv tuner card to your PC and record with Windows Media Center - either from cable or over the air. I have a Hauppauge dual t
/html/shop-talk/2014-08/msg00020.html (13,106 bytes)

164. Re: [Shop-talk] Garage door opener problem (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Sun, 14 Sep 2014 19:04:22 -0700
Try the easy thing first and pull the release so you can open and close the door manually. It should be easy if the springs are correct. Hold the door open about half way then see if the door stays t
/html/shop-talk/2014-09/msg00054.html (13,890 bytes)

165. Re: [Shop-talk] Blackening sockets/wrenches stamped markings. (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Wed, 24 Sep 2014 16:36:51 -0700
Depending on the depth of the markings, you may just be able to wipe in some paint. First clean well with paint thinner and let dry. Then paint in the markings and wipe off with a paper towel. If you
/html/shop-talk/2014-09/msg00075.html (12,033 bytes)

166. [Shop-talk] HF rotary hammer vs. demolition hammer? (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Thu, 30 Oct 2014 22:13:19 -0700
I want more power, but will $160 plus tax and bits make a big difference? Can anyone compare a Harbor Freight rotary hammer such as this one: http://www.harborfreight.com/10-amp-3-in-1-1-18-in-variab
/html/shop-talk/2014-10/msg00020.html (11,293 bytes)

167. Re: [Shop-talk] direct burial Cat 5 (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Sun, 16 Nov 2014 14:01:01 -0800
If I did it, I'd run it in PVC conduit. 1/2" conduit is cheap and may even offset the extra cost of direct burial cable. I'd be concerned about a rock or rodent damaging the cable over time. If you a
/html/shop-talk/2014-11/msg00044.html (10,872 bytes)

168. Re: [Shop-talk] Shop use for no-longer-non-stick pan? (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Fri, 12 Dec 2014 15:54:09 -0800
1: Simmer old hinges or similar parts that were painted. The paint will get really soft and come right off. I keep an old pot for this reason. 2: Put it on the back of the garage door and use it for
/html/shop-talk/2014-12/msg00017.html (10,018 bytes)

169. Re: [Shop-talk] TV converter box (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Mon, 29 Dec 2014 20:11:21 -0800
I second the vote for over the air if that is an option where you are. I had basic rabbit ears, but upgraded because I was tired of loosing ABC and Fox during recordings. I now have an outdoor antenn
/html/shop-talk/2014-12/msg00068.html (12,179 bytes)

170. Re: [Shop-talk] Home Security (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Sun, 04 Jan 2015 16:23:02 -0800
Marty - I was looking at http://simplisafe.com/ as an inexpensive option. In your case, it doesn't have a camera option available, so you would need two systems if you want video recording as well. S
/html/shop-talk/2015-01/msg00008.html (10,470 bytes)

171. Re: [Shop-talk] 4-post lift thoughts (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Mon, 05 Jan 2015 21:20:50 -0800
How about some 6mil plastic sheeting and a frame of PVC pipe or conduit? Two pipes will run the length of the vehicle, resting on the platform inside the tires, and two shorter lengths can be attache
/html/shop-talk/2015-01/msg00034.html (12,082 bytes)

172. Re: [Shop-talk] new tool Oscillating tool (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Mon, 19 Jan 2015 16:59:19 -0800
I have the cheap Harbor Freight version and recommend this type of tool as well. They are great for close quarters where you don't have room for a bigger tool. They also provide much greater control
/html/shop-talk/2015-01/msg00087.html (10,995 bytes)

173. Re: [Shop-talk] new tool Oscillating tool (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Tue, 20 Jan 2015 21:09:15 -0800
John - I used a regular cutting blade and yes it did destroy the teeth by the end of the door. Still, it was worth killing an old blade to get the job done. Now that blade is a narrow scraping blade.
/html/shop-talk/2015-01/msg00090.html (10,380 bytes)

174. Re: [Shop-talk] Truck instrument cluster, dash, and parking lights died (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Wed, 21 Jan 2015 20:02:22 -0800
Scott - I have no specific experience here, but I'd start by taking out the new radio and harness. This will reduce the likelihood that they are the problem. Maybe putting in the new radio pulled or
/html/shop-talk/2015-01/msg00092.html (12,107 bytes)

175. Re: [Shop-talk] Grinder pedestal (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Mon, 09 Feb 2015 21:43:59 -0800
I second Doug's idea. Assorted pieces of plywood with a 1x2 screwed to them make good bases. I clamp it in my Black and Decker Workmate. Another option is to attach your pedestal to a sheet of thicke
/html/shop-talk/2015-02/msg00018.html (13,124 bytes)

176. Re: [Shop-talk] Garden hose reel/caddy (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Tue, 14 Apr 2015 14:35:11 -0700
I've gone through several of the cheap Suncast ones from the big box stores. I had leak on one, called Suncast and they sent the replacement part for free. I seem to get about 10 years out of each be
/html/shop-talk/2015-04/msg00024.html (11,101 bytes)

177. Re: [Shop-talk] Axle ratio? (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Thu, 16 Apr 2015 16:53:10 -0700
David - On the tractor, you might want to see about finding someone to haul that for you. It's been a long time for me so don't have details anymore, but I needed some 3 pallets from PA to CA and had
/html/shop-talk/2015-04/msg00033.html (13,683 bytes)

178. Re: [Shop-talk] 5x8 trailer decking ideas? (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Fri, 24 Apr 2015 15:42:22 -0700
Jim - If you go with plywood, check with a real lumber yard. I purchased 5x8 sheets of 3/4" exterior plywood for my balcony which is 5 x 45. It cost more than 4x8, but the time/labor savings of not r
/html/shop-talk/2015-04/msg00069.html (11,433 bytes)

179. Re: [Shop-talk] Refrigerator (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Wed, 01 Jul 2015 17:23:29 -0700
Scott - I have a bottom freezer with french doors on the top for the fridge in my kitchen. The nice thing about the two doors on top is you don't need as much space to open the doors. My parents had
/html/shop-talk/2015-07/msg00001.html (14,009 bytes)

180. Re: [Shop-talk] Brake Pads (score: 1)
Author: Brian Kemp <bk13@earthlink.net>
Date: Thu, 02 Jul 2015 16:22:55 -0700
I don't recall any special challenges on my 2004 Odyssey when I last did those brakes. Be sure to properly support the calipers so the dust boots on the pistons don't snag on anything. You can test t
/html/shop-talk/2015-07/msg00026.html (13,053 bytes)


This search system is powered by Namazu