detaching the body from frame and shimming is the only way to fix that - and it is very hard to get right - I have seen more than 1 car look worse after this has been attempted by competent restorati
This happened to me twice, once going and once coming, on my Roadster Factory Summer Party last year. Got a new fuel tank from VB when I got home. Rarely do I get anything from anyone other than TRF
This all raises a question: are "magnesium" wheels pure magnesium or are they an alloy (presumably with aluminum)? ISTR, meanwhile, that the crankcase of the VW Beetle engine (and most of its derivat
Hi List, I hope there is someone out there that can help me with a painting question..? I am in the middle of painting the engine compartment, trunk, and passenger compartment in preparation of lower
A word of warning: I used to work with a fellow back in the day, who used a 3/8" impact to remove spark plugs (from aluminum heads). In almost every case, the plug would come out of the hole spinning
A TR6 overdrive. Please could Chuck & Kathleen Kelly-Arnold contact me regarding the TR6 transmission with overdrive. Ib ve unfortunately lost your e-mail etc, through a change of computers. Cheers
I've got a great deal on a MIG welder from Sears/ Craftsman. It came with a mickey mouse hand-held visor. I'd like to get a good one. What should I look for? For ones that say auto-darkening should I
Does anyone have some they want to sell? The '73 Fed Stag uses the same one. Regards, Sujit -- Sujit Roy, Realtor Keller Williams Realty, Cupertino, CA (408) 839-8359 ** triumphs@autox.team.net ** Do
Last check. Last oil change was 3 years ago, but only driven about 800 miles. Each trip very short runs. Sujit '71 Stag -- Sujit Roy, Realtor Keller Williams Realty, Cupertino, CA (408) 839-8359 roys
Every web search search I do, points to a place in the UK. Since these bushes are made in Australia. Is three a distributor / reteller out there that will ship to the USA? Sujit -- Sujit Roy, Realtor
I have a old style 240v dryer outlet. (three pronged socket and not 4) What I was told is that one leg is 110v from one circuit breaker and another leg is 110 from another breaker.. Is the center thi
I'm rebuilding one. On reassembly should apply any sort of grease so it moves more smoothly? Sujit -- Sujit Roy, Realtor Keller Williams Realty, Cupertino, CA (408) 839-8359 roysrealty.com ** triumph
I'm in the slow process of building a 2nd stag and am debating whether to go for poly bushes or not. The Stag is not a performance car that you can swing around corners and I don't plan on using perf
Can anyone please test me how to bench test a wiper motor with a park feature? The connector to the wiper had 4 prongs in it. -- Sujit Roy, Realtor Cupertino, CA (408) 839-8359 ** triumphs@autox.team
The head is in the trunk and looks like it was redone. There was no noticeable bore wear There looks like there is a diff rebuild kit in the trunk too. along with a 25(A)CR alternator. It's quite com
A stag I'm working on was poorly resprayed from red to blue. My hunch is the guy who did it didn't prep very well. I'd like to rub it down and expose the red , but not cut into the red. What grade/nu
My objective is to repaint cheaply in red primer for now until I can afford a professional paint job. (probably many years down the road) I have to rub it down anyway so I'd like to remove the blue a
I have attempted to repair a wiper motor switch/ stalk for a Mk2 Fed. stag. The wiper motor appears to fit other Triumphs. The only speed working is 2. When switched off, the wipers do not park. tapp
I went through a similar exercise with my '71 Stag. In addition to the 4 wires + spare I have a handful of spare hubs and wheels they all show some play, but I minimized them by swapping hubs and whe