Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Idle\s+adjustment\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Idle\s+adjustment\s*$/: 7 ]

Total 7 documents matching your query.

1. Idle adjustment (score: 1): Author: "Walton Curl" <WCURL@mail.mcg.edu>; Date: Wed, 17 May 2006 09:04:21 -0400; I have a 60 BT7, and I recently had carbs rebuilt, but I can't get the idle down below 1100 rpms on the rear carb, the front carb will stall out as I screw the throttle adjusting screw down, the rear; /html/healeys/2006-05/msg00476.html (7,152 bytes)
2. Re: Idle adjustment (score: 1): Author: "Greg Lemon" <glemon@neb.rr.com>; Date: Wed, 17 May 2006 09:15:29 -0500; Walt, also make sure the needle is properly seated and centered, the throttle plate or butterfly properly aligned so it closes and that nothing in the linkage or choke adjustment/fast idle is keeping; /html/healeys/2006-05/msg00477.html (6,936 bytes)
3. Re: Idle adjustment (score: 1): Author: Rick Swain <grain@auracom.com>; Date: Wed, 17 May 2006 11:35:58 -0300; I had a similar problem with my HD6 carbs after rebuilding. It turned out that on one carb the throttle disc wasn't able to close completely. Sorted that and the problem was gone. Cheers Rick; /html/healeys/2006-05/msg00478.html (6,789 bytes)
4. Re: Idle adjustment (score: 1): Author: "Brent Porter" <brentshealey@gmail.com>; Date: Wed, 17 May 2006 11:07:05 -0400; Walt, you stated that you "had" them rebuilt. If you paid to have them rebuilt, first I would check with that company. They might want the opportunity to correct the problem before you start taking t; /html/healeys/2006-05/msg00480.html (7,765 bytes)
5. RE: Idle adjustment (score: 1): Author: "Len and/or Marge" <thehartnetts@earthlink.net>; Date: Wed, 17 May 2006 08:16:10 -0700; Walt: I have mentioned this before, based upon a similar experience, but it bears repeating. Everything else on the engine must be correct before trying to adjust the carbs. Adjust valves, check comp; /html/healeys/2006-05/msg00481.html (8,144 bytes)
6. Re: Idle adjustment (score: 1): Author: Eric (Rick) Wilkins <wilko2@cox.net>; Date: Wed, 17 May 2006 08:30:54 -0700; There is no way to isolate the two carbs. How do you know 1 carb won't let you idle down? For one thing, on HD6 carbs, the throttle screw is not for idle adjustment. You need to disconnect the link b; /html/healeys/2006-05/msg00482.html (7,709 bytes)
7. Re: Idle adjustment (score: 1): Author: "Walton Curl" <WCURL@mail.mcg.edu>; Date: Wed, 31 May 2006 11:24:05 -0400; Thanks to all -my inability to balance the carbs and reduce the idle, was a throttle disc that wasn't closing all the way on one of the carbs. I reworked the throttle linkage and problem solved! Than; /html/healeys/2006-05/msg00925.html (7,224 bytes)

Current List: 1 - 7
Page: [1]