Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*front\s+shroud\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*front\s+shroud\s*$/: 10 ]

Total 10 documents matching your query.

1. Front Shroud (score: 1): Author: "Mel Brunet" <mburnet@tampabay.rr.com>; Date: Thu, 21 Sep 2006 10:41:36 -0400 (Eastern Standard Time); Healey folks, Can someone tell what substance (mastic/caulking?) is used when reinstalling the front shroud on a 67 BJ8? TIA Mel Brunet 67 BJ8 39749; /html/healeys/2006-09/msg00417.html (6,494 bytes)
2. RE: Front Shroud (score: 1): Author: "Brashear, Jack, N" <JNBrashear@garverengineers.com>; Date: Thu, 21 Sep 2006 10:22:26 -0500; Hi Mel, The AH front shrouds I've seen over the last 40 or so years never seem to fit EXACTLY the same way. Here's what I did recently on two cars I put together: I used the NAPA brand of strip caulk; /html/healeys/2006-09/msg00418.html (7,979 bytes)
3. Re: Front Shroud (score: 1): Author: John Loftus <loftusdesign@cox.net>; Date: Fri, 22 Sep 2006 11:49:00 -0700; Hi Mel, I used 3M Strip Calk which can be found at auto paint/body work stores. It's also referred to as "dum dum" putty. It comes in a box of 60 1 ft. lengths and is a soft non-hardening butyl rubbe; /html/healeys/2006-09/msg00434.html (7,153 bytes)
4. front shroud (score: 1): Author: Warthodson@aol.com; Date: Mon, 9 Oct 2006 12:40:05 EDT; A friend is trying to locate a complete front shroud in good condition or preferably the front clip including the grill opening, headlight openings & lower section with single small signal lights for; /html/healeys/2006-10/msg00180.html (6,525 bytes)
5. Re: front shroud (score: 1): Author: "Rich C" <richchrysler@quickclic.net>; Date: Mon, 9 Oct 2006 13:45:15 -0400; Buyer beware. The front grille aperture is different for the cars with the full surround and vertical teeth grille. An earlier front shroud section will have to be reworked quite a bit for proper fi; /html/healeys/2006-10/msg00183.html (7,311 bytes)
6. Re: front shroud (score: 1): Author: Warthodson@aol.com; Date: Mon, 9 Oct 2006 17:42:03 EDT; Thanks for the warning. I obviously was not aware of this! Gary; /html/healeys/2006-10/msg00187.html (6,537 bytes)
7. Front Shroud (score: 1): Author: "SBC-Ron" <ronhuseman@sbcglobal.net>; Date: Tue, 10 Oct 2006 07:52:31 -0400; Fellow Listers: I'm in the final stages of body restoration on my BJ7. I have a front shroud that has moderate crash damage on the right front. I have a local craftsman who can work with aluminum, bu; /html/healeys/2006-10/msg00205.html (7,043 bytes)
8. Re: Front Shroud (score: 1): Author: WWSCPO@aol.com; Date: Tue, 10 Oct 2006 21:11:44 EDT; I had a similar experience with my BJ8 and bought a front lower nose panel and a front upper quarter panel through Healey Surgeons from England. My body guys did an excellent job cutting and fitting; /html/healeys/2006-10/msg00221.html (6,988 bytes)
9. Re: Front Shroud (score: 1): Author: olin.brimberry@talecris.com; Date: Wed, 11 Oct 2006 09:43:55 -0400; Rich is correct. There was about a 1/2 inch difference on the height on the MKII's. Search the achieves, someone provided this research about a year ago. I have 2 spare shrouds: 1 for parts, and 1 t; /html/healeys/2006-10/msg00230.html (7,354 bytes)
10. front shroud (score: 1): Author: HealeyBJ7@aol.com; Date: Tue, 17 Oct 2006 12:47:04 EDT; What is the proper adhesive for attaching the shroud to the inner sheet Bob; /html/healeys/2006-10/msg00317.html (6,626 bytes)

Current List: 1 - 10
Page: [1]