6pack
[Top] [All Lists]

RE: rear suspension

To: 6pack@autox.team.net
Subject: RE: rear suspension
From: Bill McIntire <william.mcintire@wright.edu>
Date: Wed, 07 Jun 2000 09:51:10 -0400
Oh wise 6 Packers
I have a '70 TR6 - since new. Several years ago the rear
springs developed the middle age sag. Replaced them with TRF
springs and ended up with nearly as much + camber as I
previously had -. TRF advised that they would 'settle in'
and be OK. Well 10 or 11 or so years later, it still looked
like a dog preparing to stake out territory. 

Talked with TRF at Mid-Ohio, tried their new and improved
springs. They're better but it still takes 200 lb.. ballast
to get to 0 camber.

Anybody have recommendations for springs? I'd like to get to
`3/4 to 1 deg. neg. per Kasners setup in the Comp Prep.
book.

TIA, Bill

<Prev in Thread] Current Thread [Next in Thread>