[Top] [All Lists]

More on Atype mainshaft...

To: 6pack@autox.team.net
Subject: More on Atype mainshaft...
From: "Bernard Robbins, NEC New Zealand Ltd" <brobbins@wlg.nec.co.nz>
Date: Sat, 05 May 2001 16:12:34 +1200
Ladies and Gents,

Rimmer bros have them. www.rimmerbros.co.uk

Part numbers:
208052 Imperial mainshaft for gearboxes up to CD20281 
UKC1933 Metric mainshaft for gearboxes from CD20282 

Both are #105.00 each.

I'll let you guys sort out the currency conversion. I've purchased gearbox
bits from Rimmers before and have had no problems with quality.

Hope this heps.

Bernard Robbins
'73 TR6 PI (with flash new recovered seats!!)
'71 2500 PI

At 00:04 5/05/2001 EDT, Btp44@aol.com wrote:
>Peter-I think you mean mainshaft as there is no layshaft in the OD unit. The 
>layshaft ( also called a countershaft)lives in the bottom of the mainbox, is 
>plentifull, and cheap.  The OD mainshaft on the other hand, is scarce and 
>expensive( about $185). I think they are being reproduced in the UK and have 
>seen them listed on e-bay with OD conversions. Perhaps someone can supply an 
>address. Berry

Bernard Robbins

NEC New Zealand Ltd
Network Solutions
P.O. Box 1936

Ph      (04) 381 6274
fax     (04) 381 6284
email   brobbins@wlg.nec.co.nz

<Prev in Thread] Current Thread [Next in Thread>
  • More on Atype mainshaft..., Bernard Robbins, NEC New Zealand Ltd <=