Mike,
There is a sparkplug adapter available that enables one to use commpressed air
to hold up the valve. I would first have the cylinder piston at tdc just
incase the valve falls. The adapter is readely available at an autoparts store
in the KD brand or CAlvan (sp) brand tool display. I think that Lisle brand
also has the adapter.
Greg Perry
-----Original Message-----
From: YeOldEd@aol.com
Sent: Nov 2, 2003 5:45 PM
To: 6pack@autox.team.net
Subject: Exhaust valve spring "caps"
I'm trying to come up with a tool that I can insert through the plug orifice
to hold the valve in position while I change the caps.
(Check page 31 in the TRF Catalog).
Mike N
|