6pack
[Top] [All Lists]

RE: Engine... distributor

To: "'Adam C Beasley'" <adam@adambeasley.com>, <6pack@autox.team.net>
Subject: RE: Engine... distributor
From: "Adam C Beasley" <adam@adambeasley.com>
Date: Wed, 25 Aug 2004 20:23:31 -0400
I took my distributor apart tonight and the bushing seem fine. I think the
problem is the springs.  They seem to be too loose.  I can adjust the timing
slightly without the springs stretching at all.  Am I correct to think they
should be tight?

 

Thanks,

 

Adam

 

  _____  

From: Adam C Beasley [mailto:adam@adambeasley.com] 
Sent: Wednesday, August 25, 2004 10:06 AM
To: '6pack@autox.team.net'
Subject: Engine... distributor

 

All,

 

I found my problem. actually two.  One of my sparkplugs decided to not work
much anymore, thus I was running on 5 cylinders part of the time.
Apparently it worked sometimes but not others.  So, I replaced the plug and
gave her a test drive. not much power and still missing but not as bad.  I
checked the timing and found it was way advanced from where it was
originally set (I had timing it statically and dynamically verified).  I
adjusted the timing again dynamically to 4 ATDC and she ran smooth with good
power. SWEET!  However while I was driving I noticed when I stopped at a
stop sign that my idle had increased to 1,000 RPM from around 850. when I
got back to my garage I checked the timing and it had again advanced itself
some (but not as far).  I reset the timing and reved the engine a few times,
checked the timing. again it was advanced from 4 ATDC.  Is this normal?  I
verified my vacuum line is working as when I pull the line the RPM jumps.

 

Also, where is a good place to get distributor parts?  I'm looking for a
clamping plate for a 73 distributor in particular (the one on my car is
pretty messed up from the DPO).  Also, is there a cheaper place to find new
distributors (or refurbished/rebuilt) than TRF?  (mostly looking for
cheaper!!!)  My $5,000 car is rapidly approaching $10,000!!! :-)

 

Thanks!

 

Adam

73 TR6

  _____  

From: Adam C Beasley [mailto:adam@adambeasley.com] 
Sent: Thursday, August 19, 2004 7:58 PM
To: '6pack@autox.team.net'
Subject: Sound of Engine / ehaust

 

Does anyone have a wav or sound file of their car running with the standard
exhaust?  I was tuning mine and it sounds like a fast drum. I don't know if
that's normal or I'm missing a cylinder.  I'm waiting for my car to cool
down now so I can pull the plugs without burning myself.

 

Thanks,

 

Adam

73 TR6

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8




<Prev in Thread] Current Thread [Next in Thread>