Re: SV: Holbay question

[RootesRooter@aol.com]

In a message dated 5/16/03 12:52:04 PM Pacific Daylight Time, 
kkj@privat.utfors.se writes:

<< The small inlet port are a compromise to get a decent tickover or slow 
running behaviour. With the standard Hunter head you get more power if you 
make the combustion chamber and the inlet port like on the Holbay head. This 
also involves some mm. skimming to get compression up to Holbay level
  >>

So....is the inlet port on the Holbay head bigger than the Hunter, but 
smaller than the Series V?