Try auctions in your local area
to find cheap shop machines.
Don't go the route of the multi purpose
machines as they are a pain. Also
if you do it right you can buy a good
used unit with all the tooling.
Remember that the machine is only 1/2
of the cost. The other 1/2 is wrapped
up in tooling.
jack ~
> From autox-owner@autox.team.net Fri Jul 14 13:36:49 2000
> X-Originating-IP: [12.8.233.82]
> From: "John Thomas" <jtthomas21@hotmail.com>
> To: autox@autox.team.net
> Subject: 3in1 Machines ???
> Date: Fri, 14 Jul 2000 16:34:56 EDT
> Mime-Version: 1.0
>
> OK! OK!, I have had my fill of running around town trying to find a machine
> shop to fabricate parts for me. At this rate I will finish the Z car in the
> year 2010. Has anyone ever used, or currently using, one of the 3in1 Lathe,
> Mill and Drill press machines?? There seem's to be a few different ones on
> the market such as the Smithy and Shop Task. Are they a waste of money or
> should I continue my search for the Holy Grail??
>
> JT
> EP23 Honda
> FP,EP,GT2,??? Zcar
> ________________________________________________________________________
>
>
|