>From networx.com!chenault Thu Jul 1 16:10:34 1993
>I'm in the midst of a DIY restore of a 59 TR-3 and am trying to decide if
>it makes more sense for me to attempt to repair the read fenders, or to buy
>replacements.
>
>The PO attempted a repair using lots of bondo, but the fenders are still
>in sad shape. A re-repair will be dificult, and if it's possible to buy
>fenders which fit, I would prefer that route. Additionally, I am looking
>for a source for a door skin.
Reproduction fenders, especially those for the front, need a great
deal of "adjustment" to fit. Because of the differences from
stock, if you do go the repro route, replace BOTH fenders. Trying
to fit a single repro on one side with a stock fender on the other
is all but impossible given the alignment of the fenders with
the front apron, the hood and the body tub.
>I know that TRF and Moss sell these parts, has anyone had experience with
>their products, or can someone who has been through this give me some
>advice.
>John
Both TRF and Moss have good products. You won't find any better that
what you can buy from them. In many cases the parts are the same,
having been sourced from the same supplier.
If you can, stick with the original fenders. Try used fenders if
needed.
Standard Disclaimer- Any opinions, etc. are mine and NOT my employer's.
-----------------------------------------------------------------------
Bill Sohl (K2UNK) BELLCORE (Bell Communications Research, Inc.)
Morristown, NJ email via UUCP bcr!cc!whs70
201-829-2879 Weekdays email via Internet whs70@cc.bellcore.com
|