datsun-roadsters
[Top] [All Lists]

RE: Volvo Front Brake Caliper Conversion

To: "Steve C Allen" <67datroad@vbbn.com>
Subject: RE: Volvo Front Brake Caliper Conversion
From: "Brian Hollands" <bholland@hayes.ds.adp.com>
Date: Wed, 6 Mar 2002 09:18:39 -0500
Probably a 142.  Try this and see if they look right.
http://www.volvoworld.com/
click on either the 140 or 164 link under the 240/260 link.  Select front
brakes.  They are 4 pot.

Brian '69 2000
Tampa, FL
http://web.tampabay.rr.com/oilleak/



-----Original Message-----
 I looked at a site dedicated to nothing
but Volvo's and there never was a 124. There is a 240 in that era but no
124. Does anyone out there have any knowledge of this conversion? It is
something I would like
to try on a 66 I will be working on and does not appear to be that hard if I
could just figure out what Volvo caliper I need. This might be an attractive
alternative to the
stock setup. Thanks.
utox.team.net

///  datsun-roadsters@autox.team.net mailing list


<Prev in Thread] Current Thread [Next in Thread>